Oak Herringbone Aged Natural Oiled Ebony 15x70x280mm

Oak Herringbone Aged Natural Oiled Ebony 15x70x280mm

With its tumbled edges and soft worn appearance, our range of aged wood flooring has a convincingly antique look, which looks like it’s developed naturally over the years. Our aged parquet looks like it has aged gracefully over the years and has all the character and charm of a reclaimed floor.

If you want the drama of a dark floor but don’t want anything that’s too overpowering, this ebony floor is a perfect match. With this design, we’ve just enhanced the important features of the wood with the dark ebony oil. The rest of the oak is brought to life with soft warm mid-brown tones.

Parquet can be used in any room in the home. It makes a fantastic first impression in hallways, brings an elegant charm to living rooms, and looks stunning in bedrooms. Parquet suits all styles of décor and is completely versatile. In bedrooms, kitchens, living rooms, snugs, bathrooms, and hallways, parquet will always look the part.

The ply backing of an engineered parquet floor with a hardwood veneer glued on top gives our engineered floors the same beautiful appearance of a solid wood floor but with superior construction, greater stability, and compatibility with under floor heating.

Technical details

Our engineered Parquet Woodblock has been produced using WBP birch ply, manufactured to European standard EN 326-2. The adhesive used to bond the board is an E1 category, PUR adhesive (formaldehyde free) to DIN/EN 14257 and DIN/EN 204 low emission glue which is heat and water resistant in accordance with BS EN 14342:2005+A1. The top layer is kiln dried to between 8-12% moisture content.

The formaldehyde emissions are: 0,01 ppm, pentachlorophenol emissions: <0.8 mg/kg. Thermal conductivity (W/mK) is 0,10W/mK.

Suitable for a fully bonded installation to a screed or ply subfloor, factory Oiled ready to use. *if the product is being laid in a high traffic environment then an additional coat of oil is recommended.

Compatible for use in conjunction with underfloor heating the woodblock complies with BS 8201:2011, rated in accordance with BS EN 13501-1

Product code: OWAE/280

Species: Oak

Group: Flooring

Category: Solid Flooring

Sub-Category: Parquet Woodblocks

Type of finish: Oiled – An additional coat is required.

Brushed: No

Profile: Tongue and Groove

Specification: Square End

Weight: 10 kg

Recommended Use: Domestic and Light Commercial

Pack Size: .98

Dimensions: 280 × 70 × 15 mm

Width: 70 mm

Thickness: 15 mm

Length: 280 mm

Colour : Dark

Under Floor Heating : Yes

Unit Measurement : per Square Metre

Design : Engineered, Parquet & Chevron

Engineered: 2 part Engineered floor with a Hardwood top surface bonded to a multilayer waterproof Birch Plywood. Can be Nailed, Stuck Down, or Floated depending on the sub floor. All floors are Tongue and Groove with Ends Matched unless stated otherwise.

Pre-Oiled: This product is supplied with a Factory UV Oiled surface. The Natural Wood Floor Company recommends that an additional coat of oil is applied to the surface prior to regular use.

Stick Down: Sticking involves the use of an adhesive to bond the wood flooring to either a concrete/screed sub floor or to a ply/chipboard sub floor.

Under Floor Heating: This product is compatible for use over an electric or water under floor heating system. The maximum temperature must not exceed 27 degrees Celsius at the floor surface.