OSMO Maintenance Oil

OSMO Maintenance Oil

Professional Refreshing

•     Ideal for public and commercial use
•     Fast drying
•     Cleans and regenerates the wood at the same time
•     Helps removes small spot marks such as grease and shoe polish
•     Maintains protected surfaces without wear of treatment
•     Occasional maintenance without the need for sanding

Finishes: Satin, Semi-Matt, Matt, White Transparent (Satin)

Application Tools: Osmo Double Blade Scraper or Osmo Microfibre Roller and white pad (exception of 3098)

Recommended Use: Interior wooden flooring treated with Polyx-Oil in both domestic and commercial areas

Sizes: 1L, 2.5L

Dry Time: 3-4 hours

Clean Up: Osmo Brush Cleaner

Coverage: 40-60m²/L with one coat

Coats: 1 coats

Frequency: Occasional

Instructions

Surface Preparation

Wood surface must be clean, dry (moisture content max. 18 %) and free of dust.
Osmo Maintenance Oil is ready to use. Do not thin.
Stir well before use.
Clean the surface thoroughly with Osmo Intensive Cleaner and rinse (damp mopping) with clear water.
The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.

Method of Application

With Osmo Double Blade Scraper or Osmo Microfibre Roller, apply thinly and evenly to the clean and dry wood along the wood grain and rub into the wood with a white pad (do not rub in 3098). Remove excess product.
For smaller areas, Osmo Maintenance Oil can be applied with a lint-free cloth.
Allow for good ventilation while drying.

Note

The maintenance results are influenced by several factors, including the condition of wood. Therefore, a trial application is always required. If wood is raw or already greyed, the surface must be sanded and treated with Osmo Polyx®-Oil. Do not rub in Maintenance Oil 3098 Semi-Matt/Anti-Slip with a single disc machine.