Oak Board Natural Lacquered Drought 15x240mm

Oak Board Natural Lacquered Drought 15x240mm

Oak Board Natural Lacquered Drought 15x240mm: This floor features the warm, mid-brown tones of Oak enhanced with a subtle white finish that adds brightness without overwhelming the natural character. The result is a fresh, clean look that effortlessly uplifts any space.

The surface has been brushed to remove the softer grain, allowing the colour to penetrate more deeply and create a beautifully textured appearance. Oak’s versatility and excellent pigment absorption make it an ideal choice for pre-sealed flooring. The unique grain and natural charm of the Oak remain visible through the finish, delivering a floor with timeless appeal that pairs seamlessly with a variety of interior styles

Our new Hybrid lacquered flooring is designed to be a highly durable low maintenance finish with a very natural feel and look.
Our engineered wood flooring meets modern requirements and keeps a traditional wood flooring appearance. The multiple layers of birch plywood backing give support to the hardwood top layer, resulting in a floor that looks and feels like a solid wood floor but that is suitable for under floor heating which can still be sanded and re-finished after years of use.

Technical details

Our engineered board has been produced using WBP birch ply, manufactured to European standard EN 326-2. The adhesive used to bond the board is an E1 category, PUR adhesive (formaldehyde free) to DIN/EN 14257 and DIN/EN 204 low emission glue which is heat and water resistant in accordance with BS EN 14342:2005+A1. The top layer is kiln dried to between 8-12% moisture content.

The formaldehyde emissions are: 0,01 ppm, pentachlorophenol emissions: <0.8 mg/kg. Thermal conductivity (W/mK) is 0,10W/mK.

Suitable for secret fixing to a ply subfloor, floating on an underlay or a fully bonded installation to a screed subfloor. The board is supplied with a micro bevel along the length of the board, factory lacquered ready to use.

Compatible for use in conjunction with underfloor heating the board complies with BS 8201:2011, rated in accordance with BS EN 13501-1, and is classified D fl -S1 when laid as a fixed floor on a structural subfloor or E fl- S1 when laid on battens or joists for minimal smoke production..

Species: Oak

Type of finish: Lacquered

Brushed: Medium

Profile: Tongue and Groove

Specification: Bevelled Edge

Weight: 12 kg

Recommended Use: Domestic and Light Commercial

Dimensions: 240 × 15 mm

Width: 240 mm

Thickness: 15 mm

Colour : Light

Under Floor Heating : Yes

Unit Measurement : per Square Metre

Design : 15mm Boards, Engineered

Engineered: 2 part Engineered floor with a Hardwood top surface bonded to a multilayer waterproof Birch Plywood. Can be Nailed, Stuck Down, or Floated depending on the sub floor. All floors are Tongue and Groove with Ends Matched unless stated otherwise.

Floating: A floating floor is not physically connected to the sub floor. Normally laid on an underlay, the floor is joined by gluing the tongue and groove together or by using a click system.

Micro Bevelled: Micro Bevelled means a very small v shape can be seen on the long sides of the boards. The ends have no bevel.

Nail Fitting: Nail fixing is usually done via a nail gun, e.g. Porta-Nailer, where a serrated nail is inserted through the tongue at 45 degrees.

Pre-Lacquered: This product is supplied with a Factory UV Lacquered surface. This product is suitable to walk on immediately.

Stick Down: Sticking involves the use of an adhesive to bond the wood flooring to either a concrete/screed sub floor or to a ply/chipboard sub floor.

Under Floor Heating: This product is compatible for use over an electric or water under floor heating system. The maximum temperature must not exceed 27 degrees Celsius at the floor surface.